How do I mount the AV-240 solar engine?

This article discusses how to mount the AV-240 solar engine.

The AV-240 comes equipped with a mounting bracket. This bracket is installed to the bottom of the signal housing for post top mounting.

Mounting brackets are available for:

  • 2” square post
  • 2.38” OD or larger round post
  • U-channel post
    • Can be used for square posts larger than 2"
  • 4.5" round post

The LED sign can be bolted or banded to the pole with customer supplied hardware.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.